SANE

SANE: Supported Devices

The following table summarizes the devices supported by sane-backends-1.0.12.

This is only a summary! Please consult the manpages and the author-supplied webpages for more detailed (and usually important) information concerning each backend.

There are special tables for parallel port and USB scanners from Jonathan Buzzard.

If you have new information or corrections, please send e-mail to sane-devel, the SANE mailing list.

For an explanation of the tables, see the legend.

There are tables for scanners, still cameras, video cameras, APIs, and meta backends.

Scanners

Manufacturers: Abaton, Acer Peripherals, Across Technologies, Actown, Adlib, AGFA, Apple, Aries, Artec/Ultima, Avision, Bell and Howell, Benq, BlackWidow, Boeder, BrightScan, Brother, Canon, Compaq, Cybercom, Devcom, Dextra, E-Lux, EDGE, Enhans, Epson, Escom, Escort, Fujitsu, Gallery, Genius, Guillemot / Hercules, Hewlett-Packard, IBM, Komodo, LEO, Lexmark, Linotype Hell, Medion/Lifetec/Tevion/Cytron, Memorex, Microtek, Minolta, Mitsubishi, Mustek, NEC, Nikon, Packard Bell, Panasonic, PIE, PIOTECH, Plustek, Primax, Prolink, Reflecta, Relisys, Ricoh, Scanport, Sceptre, Sharp, Siemens, Spot Technology, Syscan, Tamarack, Targa, Trust, UMAX, Visioneer, Viviscan, Vobis, Vuego

Manufacturer: Abaton

Model Interface Status Comment Backend Manpage
Scan 300/GS SCSI alpha All known modes and functions supported abaton
(v0.1) 		sane-abaton
Scan 300/S SCSI untested Untested, use with caution abaton
(v0.1) 		sane-abaton

Manufacturer: Acer Peripherals

Comment: Company was renamed to Benq.

Manufacturer: Across Technologies

Model Interface Status Comment Backend Manpage
FS-1130 SCSI beta FCC ID LUZFS1130 leo
(v1.0-10) 		sane-leo

Manufacturer: Actown

Model Interface Status Comment Backend Manpage
ACT Scan I 30 SCSI untested sub model VM3520A teco1
(v1.0-9) 		sane-teco1

Manufacturer: Adlib

Model Interface Status Comment Backend Manpage
JetScan630 SCSI stable   pie
(v1.0) 		sane-pie
JetScan636PRO SCSI untested   pie
(v1.0) 		sane-pie

Manufacturer: AGFA

Link(s): http://www.agfa.com/

Model Interface Status Comment Backend Manpage
Arcus 1200 SCSI stable Optional transparency unit supported. SnapScan
(v1.4) 		sane-snapscan
Arcus II SCSI beta Arcus *II*, not Arcus! microtek
(v0.13.1) 		sane-microtek
DuoScan SCSI alpha   microtek
(v0.13.1) 		sane-microtek
Focus Color SCSI alpha 3-pass agfafocus
(v0.2) 		sane-agfafocus
Focus Color Plus SCSI alpha 3-pass agfafocus
(v0.2) 		sane-agfafocus
Focus GS Scanner SCSI untested 6 bit gray agfafocus
(v0.2) 		sane-agfafocus
Focus II SCSI untested gray only agfafocus
(v0.2) 		sane-agfafocus
Focus Lineart Scanner SCSI untested Lineart only? Untested. agfafocus
(v0.2) 		sane-agfafocus
SnapScan 300 SCSI beta   SnapScan
(v1.4) 		sane-snapscan
SnapScan 310 SCSI beta   SnapScan
(v1.4) 		sane-snapscan
SnapScan 600 SCSI stable Optional ADF supported. SnapScan
(v1.4) 		sane-snapscan
SnapScan 1212u USB stable   SnapScan
(v1.4) 		sane-snapscan
SnapScan 1236s SCSI stable Optional ADF and transparency unit supported. SnapScan
(v1.4) 		sane-snapscan
SnapScan 1236u USB stable Optional ADF and transparency unit supported. SnapScan
(v1.4) 		sane-snapscan
SnapScan e10 USB stable   SnapScan
(v1.4) 		sane-snapscan
SnapScan e20 USB stable   SnapScan
(v1.4) 		sane-snapscan
SnapScan e25 USB stable   SnapScan
(v1.4) 		sane-snapscan
SnapScan e26 USB stable   SnapScan
(v1.4) 		sane-snapscan
SnapScan e40 USB stable   SnapScan
(v1.4) 		sane-snapscan
SnapScan e42 USB stable   SnapScan
(v1.4) 		sane-snapscan
SnapScan e50 USB stable Optional tranparency unit supported SnapScan
(v1.4) 		sane-snapscan
SnapScan e52 USB stable Optional tranparency unit supported SnapScan
(v1.4) 		sane-snapscan
SnapScan e60 USB untested   SnapScan
(v1.4) 		sane-snapscan
StudioScan SCSI beta   microtek
(v0.13.1) 		sane-microtek
StudioScan II SCSI beta   microtek
(v0.13.1) 		sane-microtek
StudioScan IIsi SCSI beta   microtek
(v0.13.1) 		sane-microtek

Manufacturer: Apple

Link(s): http://developer.apple.com/

Model Interface Status Comment Backend Manpage
Apple Scanner SCSI alpha 4bit, 16 shades of gray apple
(v0.31) 		sane-apple
ColorOneScanner SCSI alpha truecolor (needs much work) but it scans in non color modes. apple
(v0.31) 		sane-apple
OneScanner SCSI alpha 8bit, 256 shades of gray. The backend needs work especially in the quantization code but it may work. apple
(v0.31) 		sane-apple

Manufacturer: Aries

Model Interface Status Comment Backend Manpage
Scan-It Pro 4800 Parport (SPP, EPP) stable use driver-switch mov=2 plustek
(v0.45) 		sane-plustek

Manufacturer: Artec/Ultima

Link(s): http://www.artecusa.com/

Model Interface Status Comment Backend Manpage
1236 USB USB unsupported Unsupported. Vendor/product 0x05d8/0x4001. Same id as one of the Artec Ultima 2000 scanners. More information (e.g. /proc/bus/usb/devices output) would be appreciated. unsupported
(v2003-05-25) 		?
A6000C SCSI stable all modes working artec
(v0.5.16) 		sane-artec
A6000C PLUS SCSI stable f/w <= v1.92 alpha, f/w >= v1.93 OK artec
(v0.5.16) 		sane-artec
AM12e+ Parport unsupported Unsupported. Chipset unknown. Maybe similar to SCSI version or as6e? unsupported
(v2003-05-25) 		?
AM12S SCSI stable all modes working artec
(v0.5.16) 		sane-artec
AS6E Parport alpha Requires the program 'as6edriver' to run. as6e
(v0.4.2) 		sane-as6e
AT3 SCSI stable all modes working artec
(v0.5.16) 		sane-artec
AT6 SCSI alpha First scan works, subsequent fail until scanner power cycle. artec
(v0.5.16) 		sane-artec
AT12 SCSI stable all modes working artec
(v0.5.16) 		sane-artec
E+ 48U USB beta CIS scanner based on the GT6816 chip. Apparently all other devices are re-badged Artec scanners. artec_eplus48u
(v0.0.10) 		sane-artec_eplus48u
E+ Pro USB unsupported Not supported. Vendor/product 0x05d8/0x4004. /proc/bus/usb/devices output is available. Chipset is GT6816. May work with the gt68xx backend after some work in the source code. unsupported
(v2003-05-25) 		?
Ultima 2000 USB beta works, only product id 0x4002 is supported gt68xx
(v1.0-46) 		sane-gt68xx
Ultima 2000 (0x4001) USB unsupported Same name, but different ids: vendor/product 0x05d8/0x4001 is not supported. Chips: WINBOND W6662CF, POWERVISION PV108630-C2L, ATC 93LC46 (EEPROM?). The chips look similar to that reported on the umax1220u page. The scanner with product id 0x4002 is supported by the gt68xx backend. unsupported
(v2003-05-25) 		?
Ultima 2000 e+ USB alpha works, only limited testing until now gt68xx
(v1.0-46) 		sane-gt68xx

Manufacturer: Avision

Link(s): http://www.avision.com, http://www.avision.com/

Model Interface Status Comment Backend Manpage
AV100CS SCSI untested   avision
(vBuild: 70) 		sane-avision
AV100IIICS SCSI untested   avision
(vBuild: 70) 		sane-avision
AV100S SCSI untested   avision
(vBuild: 70) 		sane-avision
AV210 USB untested   avision
(vBuild: 70) 		sane-avision
AV220 USB untested   avision
(vBuild: 70) 		sane-avision
AV240SC SCSI untested   avision
(vBuild: 70) 		sane-avision
AV260CS SCSI untested   avision
(vBuild: 70) 		sane-avision
AV360CS SCSI untested   avision
(vBuild: 70) 		sane-avision
AV363CS SCSI untested   avision
(vBuild: 70) 		sane-avision
AV420CS SCSI untested   avision
(vBuild: 70) 		sane-avision
AV600U USB untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV600U Plus USB untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV610CU Scancopier USB untested 1 pass, 600 dpi avision
(vBuild: 70) 		sane-avision
AV620CS SCSI stable 1 pass, 600 dpi avision
(vBuild: 70) 		sane-avision
AV620CS Plus SCSI stable 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV630CS SCSI stable 1 pass, 1200 dpi - regularly tested avision
(vBuild: 70) 		sane-avision
AV630CSL SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV660S USB untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV680S USB untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV690U USB untested 1 pass, 2400 dpi avision
(vBuild: 70) 		sane-avision
AV800S SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV810C SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV820 SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV820C SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV820C Plus SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV830C SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV830C Plus SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV880 SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV880C SCSI untested 1 pass, 1200 dpi avision
(vBuild: 70) 		sane-avision
AV6120 SCSI untested   avision
(vBuild: 70) 		sane-avision
AV6240 SCSI stable 1 pass, ??? dpi avision
(vBuild: 70) 		sane-avision
AV8000S SCSI stable 1 pass, 1200 dpi, A3 - regularly tested avision
(vBuild: 70) 		sane-avision
AVA3 SCSI untested 1 pass, 600 dpi, A3 avision
(vBuild: 70) 		sane-avision
iVina FB1600 USB unsupported Not supported. Is reported to use GeneScan II GL646 chipset. Same as UMAX Astra 4500. unsupported
(v2003-05-25) 		?
iVina FB1800 USB unsupported Not supported. No chipset information available. Same as UMAX Astra 4700. unsupported
(v2003-05-25) 		?
iVina FB2400 USB unsupported Not supported. No chipset information available. Same as UMAX Astra 6700. unsupported
(v2003-05-25) 		?

Manufacturer: Bell and Howell

Link(s): http://www.bhscanners.com/

Model Interface Status Comment Backend Manpage
COPISCAN II 2135 SCSI untested Simplex Scanner bh
(v1.0-4) 		sane-bh
COPISCAN II 2137(A) SCSI beta Simplex Scanner (with ACE) - limited testing bh
(v1.0-4) 		sane-bh
COPISCAN II 2138A SCSI untested Simplex Scanner with ACE bh
(v1.0-4) 		sane-bh
COPISCAN II 3238 SCSI untested Simplex Scanner bh
(v1.0-4) 		sane-bh
COPISCAN II 3338(A) SCSI untested Simplex Scanner (with ACE) bh
(v1.0-4) 		sane-bh
COPISCAN II 6338 SCSI beta Duplex Scanner with ACE - development model bh
(v1.0-4) 		sane-bh

Manufacturer: Benq

Link(s): http://www.benq.com
Comment: Formerly Acer Peripherals

Model Interface Status Comment Backend Manpage
300f SCSI stable   SnapScan
(v1.4) 		sane-snapscan
310s SCSI stable   SnapScan
(v1.4) 		sane-snapscan
310u USB stable   SnapScan
(v1.4) 		sane-snapscan
320u USB stable   SnapScan
(v1.4) 		sane-snapscan
340u USB stable   SnapScan
(v1.4) 		sane-snapscan
610plus SCSI stable   SnapScan
(v1.4) 		sane-snapscan
610s SCSI stable   SnapScan
(v1.4) 		sane-snapscan
620s SCSI stable   SnapScan
(v1.4) 		sane-snapscan
620u USB stable Optional tranparency unit supported SnapScan
(v1.4) 		sane-snapscan
640bu USB stable   SnapScan
(v1.4) 		sane-snapscan
640u USB stable Optional tranparency unit supported SnapScan
(v1.4) 		sane-snapscan
1240 USB stable Optional tranparency unit supported SnapScan
(v1.4) 		sane-snapscan
3300 USB stable   SnapScan
(v1.4) 		sane-snapscan
4300 USB stable   SnapScan
(v1.4) 		sane-snapscan
5000 USB beta   SnapScan
(v1.4) 		sane-snapscan
5300 USB alpha Problems with firmware upload reported SnapScan
(v1.4) 		sane-snapscan

Manufacturer: BlackWidow

Link(s): http://www.blackwidow.co.uk/

Model Interface Status Comment Backend Manpage
BW4800SP SCSI stable rebadged Artec AT3 artec
(v0.5.16) 		sane-artec

Manufacturer: Boeder

Model Interface Status Comment Backend Manpage
Sm@rtScan Office Parport USB unsupported Unsupported. Vendor/product 0x5cb, 0x1483. According to linux-usb.org that's the same ids as Trust Trust CombiScan 19200. The vendor is PowerVision Technologies, Inc. Maybe also a PV8630 as in the UMAX 1200U? unsupported
(v2003-05-25) 		?
Sm@rtScan Slim Edition USB beta similar to Artec Ultima 2000 gt68xx
(v1.0-46) 		sane-gt68xx

Manufacturer: BrightScan

Model Interface Status Comment Backend Manpage
BrighScan OpticPro Parport (SPP, EPP) stable Reported as P12 plustek
(v0.45) 		sane-plustek

Manufacturer: Brother

Link(s): http://www.brother.com/

Model Interface Status Comment Backend Manpage
MFC 4600 Parport USB unsupported Unsupported. However there is a project to support this scanner/printer/fax combination. See link. unsupported
(v2003-05-25) 		?
MFC 5100c Parport USB unsupported Unsupported. Some information is available (see link). See also MFC 4600. unsupported
(v2003-05-25) 		?
MFC 6800 USB unsupported Unsupported. A backend is under development (see link). Vendor/product 0x04f9/0x0111. See also MFC 4600. unsupported
(v2003-05-25) 		?

Manufacturer: Canon

Link(s): http://www.canon.com/

Model Interface Status Comment Backend Manpage
CanoScan 300 SCSI beta 1 pass; flatbed scanner canon
(v1.12) 		sane-canon
CanoScan 600 SCSI beta   canon
(v1.12) 		sane-canon
CanoScan 620S SCSI beta 1 pass; flatbed scanner canon
(v1.12) 		sane-canon
CanoScan 1200S SCSI beta 1 pass; flatbed scanner canon
(v1.12) 		sane-canon
CanoScan 2700F SCSI beta 1 pass; film scanner canon
(v1.12) 		sane-canon
CanoScan 2710S SCSI beta 1 pass; 36bit film scanner canon
(v1.12) 		sane-canon
CanoScan D646U USB unsupported Probably not supported. USB Vendor/product 0x04a9/0x220b. /proc/bus/usb/devices output available. Maybe Genesys USB bridge + LM9830? Maybe could be supported by canon630u backend? See link for more information. unsupported
(v2003-05-25) 		?
CanoScan D660U USB unsupported Unsupported. Vendor/product 0x04a9/0x2208. See link for more information. unsupported
(v2003-05-25) 		?
CanoScan D1250U2 USB unsupported Not supported. However, someone started working on this scanner and some information is available (see link). unsupported
(v2003-05-25) 		?
CanoScan FB310P Parport (ECP) unsupported Rebadged Avision, different command set canon_pp
(v0.32) 		sane-canon_pp
CanoScan FB320P Parport (ECP) alpha Newly added support canon_pp
(v0.32) 		sane-canon_pp
CanoScan FB330P Parport (ECP) beta   canon_pp
(v0.32) 		sane-canon_pp
CanoScan FB610P Parport (ECP) unsupported Rebadged Avision, different command set canon_pp
(v0.32) 		sane-canon_pp
CanoScan FB620P Parport (ECP) alpha Newly added support canon_pp
(v0.32) 		sane-canon_pp
CanoScan FB620U USB unsupported Probably not supported. Vendor/product 0x4a9/0x2202. Some information is available. unsupported
(v2003-05-25) 		?
CanoScan FB630P Parport (ECP) beta   canon_pp
(v0.32) 		sane-canon_pp
CanoScan fb630u USB beta OK canon630u
(v0.1) 		sane-canon630u
CanoScan fb636u USB untested hopefully works canon630u
(v0.1) 		sane-canon630u
CanoScan FB1210U USB unsupported Not supported. Vendor/product 0x4a9/0x2205. However, a stand-alone program for FreeBSD is available. unsupported
(v2003-05-25) 		?
CanoScan LiDE20 USB beta Poor color picture quality plustek
(v0.45) 		sane-plustek
CanoScan LiDE30 USB beta Poor color picture quality plustek
(v0.45) 		sane-plustek
CanoScan N340P Parport (ECP) beta   canon_pp
(v0.32) 		sane-canon_pp
CanoScan N640P Parport (ECP) beta   canon_pp
(v0.32) 		sane-canon_pp
CanoScan N640P ex Parport (ECP) beta Just an N640P in a different box? canon_pp
(v0.32) 		sane-canon_pp
CanoScan N650U/N656U USB stable   plustek
(v0.45) 		sane-plustek
CanoScan N670U/N676U USB beta Poor color picture quality plustek
(v0.45) 		sane-plustek
CanoScan N1220U USB beta Poor color picture quality plustek
(v0.45) 		sane-plustek
CanoScan N1240U USB beta Poor color picture quality plustek
(v0.45) 		sane-plustek
FS4000 USB SCSI unsupported Not supported. USB Vendor/product 0x04a9/0x3042. May work with Vuescan. Maybe SCSI over USB. unsupported
(v2003-05-25) 		?
LiDE 50 USB unsupported Probably not supported. Chipset probably Genesys. Some information is available. unsupported
(v2003-05-25) 		?

Manufacturer: Compaq

Link(s): http://www.compaq.com/

Model Interface Status Comment Backend Manpage
S4 100 USB unsupported Not supported. Vendor=0x049f, Product=0x001a. unsupported
(v2003-05-25) 		?
S4-100 USB stable Identical to UMAX 3400 plustek
(v0.45) 		sane-plustek
S200 USB unsupported Not supported. 2400x1200 dpi. Vendor=0x049f, Product=0x0021. One bulk-in, one bulk-out and one interrupt endpoint. Type-number: U0001-HB21, another type nr on the inside: 75100512-00 unsupported
(v2003-05-25) 		?

Manufacturer: Cybercom

Model Interface Status Comment Backend Manpage
9352 Parport (EPP) alpha 300 dpi CCD scanner mustek_pp
(v12) 		sane-mustek_pp

Manufacturer: Devcom

Link(s): http://www.blackwidow.co.uk/

Model Interface Status Comment Backend Manpage
9630S SCSI untested   pie
(v1.0) 		sane-pie
9636PRO SCSI stable   pie
(v1.0) 		sane-pie
9636S SCSI untested   pie
(v1.0) 		sane-pie

Manufacturer: Dextra

Model Interface Status Comment Backend Manpage
DF-600P SCSI beta sub model VM3510 teco1
(v1.0-9) 		sane-teco1
DF-1200T+ SCSI untested sub model VM3530+ teco1
(v1.0-9) 		sane-teco1
DF-4830T SCSI untested sub model VM4542 teco1
(v1.0-9) 		sane-teco1
DF-9624 SCSI untested sub model VM6530+ teco1
(v1.0-9) 		sane-teco1

Manufacturer: E-Lux

Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX

Model Interface Status Comment Backend Manpage
j-6121 Parport unsupported Probably unsupported. Sold 1998. Same as E-Lux j-6121. unsupported
(v2003-05-25) 		?

Manufacturer: EDGE

Model Interface Status Comment Backend Manpage
KTX-9600US SCSI untested no feedback umax
(v1.0-37) 		sane-umax

Manufacturer: Enhans

Comment: E-Lux and Enhans seem to have been purchased by dysan, now known as MEMOREX

Model Interface Status Comment Backend Manpage
j-6121 Parport unsupported Probably unsupported. Sold 1998. Same as E-Lux j-6121. unsupported
(v2003-05-25) 		?

Manufacturer: Epson

Link(s): http://www.epson.com/, http://www.epson.com

Model Interface Status Comment Backend Manpage
Actionscanner II Parport beta US version of GT-5000 epson
(v0.2.32) 		sane-epson
CX-3200 USB alpha   epson
(v0.2.32) 		sane-epson
CX-5200 USB alpha   epson
(v0.2.32) 		sane-epson
ES-300C SCSI Parport beta US version of GT-6000 epson
(v0.2.32) 		sane-epson
ES-600C Parport beta US version of GT-6500 epson
(v0.2.32) 		sane-epson
ES-1200C Parport beta US version of GT-9000 epson
(v0.2.32) 		sane-epson
ES-8500 SCSI beta   epson
(v0.2.32) 		sane-epson
Expression 636 SCSI stable US version of GT-9500 epson
(v0.2.32) 		sane-epson
Expression 800 SCSI stable   epson
(v0.2.32) 		sane-epson
Expression 1600 SCSI USB IEEE-1394 stable   epson
(v0.2.32) 		sane-epson
Expression 1680 SCSI USB IEEE-1394 stable   epson
(v0.2.32) 		sane-epson
FilmScan 200 SCSI untested A better backend for the FilmScan 200 can be found at http://www.vjet.demon.co.uk/scanner/ epson
(v0.2.32) 		sane-epson
GT-5000 Parport beta   epson
(v0.2.32) 		sane-epson
GT-5500 SCSI beta   epson
(v0.2.32) 		sane-epson
GT-6000 SCSI Parport beta   epson
(v0.2.32) 		sane-epson
GT-6500 Parport beta   epson
(v0.2.32) 		sane-epson
GT-7000 SCSI beta   epson
(v0.2.32) 		sane-epson
GT-8000 SCSI beta   epson
(v0.2.32) 		sane-epson
Perfection 600 SCSI stable OK, SCSI-ID=EPSON Perfection600 umax
(v1.0-37) 		sane-umax
Perfection 610 USB stable   epson
(v0.2.32) 		sane-epson
Perfection 636S SCSI stable US version of GT-7000 epson
(v0.2.32) 		sane-epson
Perfection 636U USB stable   epson
(v0.2.32) 		sane-epson
Perfection 640 USB stable   epson
(v0.2.32) 		sane-epson
Perfection 660 USB beta   SnapScan
(v1.4) 		sane-snapscan
Perfection 1200Photo USB stable with TPU epson
(v0.2.32) 		sane-epson
Perfection 1200S SCSI stable   epson
(v0.2.32) 		sane-epson
Perfection 1200U USB stable   epson
(v0.2.32) 		sane-epson
Perfection 1240 SCSI USB stable   epson
(v0.2.32) 		sane-epson
Perfection 1250 USB stable   plustek
(v0.45) 		sane-plustek
Perfection 1250Photo USB stable   plustek
(v0.45) 		sane-plustek
Perfection 1260 USB stable   plustek
(v0.45) 		sane-plustek
Perfection 1260Photo USB stable   plustek
(v0.45) 		sane-plustek
Perfection 1640 SCSI USB stable   epson
(v0.2.32) 		sane-epson
Perfection 1650 USB stable   epson
(v0.2.32) 		sane-epson
Perfection 1660 USB stable   epson
(v0.2.32) 		sane-epson
Perfection 2400 USB stable   epson
(v0.2.32) 		sane-epson
Perfection 2450 USB IEEE-1394 stable   epson
(v0.2.32) 		sane-epson
Perfection 3200 USB stable US version of the GT-9800 epson
(v0.2.32) 		sane-epson

Manufacturer: Escom

Model Interface Status Comment Backend Manpage
Image Scanner 256 SCSI stable OK, SCSI-ID=UMAX UG 80 umax
(v1.0-37) 		sane-umax

Manufacturer: Escort

Model Interface Status Comment Backend Manpage
Galleria 600 SCSI untested untested, SCSI-ID=ESCORT Galleria 600S umax
(v1.0-37) 		sane-umax

Manufacturer: Fujitsu

Link(s): http://www.fujitsu.com/, http://imagescanner.fujitsu.com/product/index.html, http://www.fcpa.fujitsu.com/products/scanners/, http://www.fujitsu.ca/

Model Interface Status Comment Backend Manpage
fi-4010C USB unsupported Unsupported. Vendor/product: 0x04c5, 0x1029. Maybe similar to fi-4220C? unsupported
(v2003-05-25) 		?
fi-4110CU USB unsupported Unsupported. Vendor/product unknown. Maybe similar to fi-4220C? unsupported
(v2003-05-25) 		?
fi-4120C USB SCSI untested Probably similar to fi-4220C? fujitsu
(v1.0) 		sane-fujitsu
fi-4220C SCSI USB beta   fujitsu
(v1.0) 		sane-fujitsu
fi-4340C SCSI USB beta   fujitsu
(v1.0) 		sane-fujitsu
M3091DCd SCSI beta   fujitsu
(v1.0) 		sane-fujitsu
M3092DCd SCSI beta   fujitsu
(v1.0) 		sane-fujitsu
M3093GDim SCSI beta   fujitsu
(v1.0) 		sane-fujitsu
M3093GXim SCSI beta   fujitsu
(v1.0) 		sane-fujitsu
M3096G SCSI beta   fujitsu
(v1.0) 		sane-fujitsu
M4097 SCSI beta   fujitsu
(v1.0) 		sane-fujitsu
ScanPartner SCSI untested   avision
(vBuild: 70) 		sane-avision
ScanPartner 10 SCSI untested   avision
(vBuild: 70) 		sane-avision
ScanPartner 10C SCSI untested   avision
(vBuild: 70) 		sane-avision
ScanPartner 15C SCSI untested   avision
(vBuild: 70) 		sane-avision
ScanPartner 93GX SCSI beta   fujitsu
(v1.0) 		sane-fujitsu
ScanPartner 300C SCSI untested   avision
(vBuild: 70) 		sane-avision
ScanPartner 600C SCSI untested   avision
(vBuild: 70) 		sane-avision
ScanPartner Jr SCSI untested   avision
(vBuild: 70) 		sane-avision
ScanStation SCSI untested   avision
(vBuild: 70) 		sane-avision
SP15C SCSI beta   sp15c
(v1.12) 		sane-sp15c

Manufacturer: Gallery

Model Interface Status Comment Backend Manpage
4800 Parport (EPP) alpha 300 dpi CCD scanner mustek_pp
(v12) 		sane-mustek_pp

Manufacturer: Genius

Link(s): http://www.genius-kye.com/, http://www.geniusnet.com.tw/, http://www.genius.kye.de/

Model Interface Status Comment Backend Manpage
Colorpage HR6 V2 USB stable   plustek
(v0.45) 		sane-plustek
Colorpage HR6A USB untested   plustek
(v0.45) 		sane-plustek
Colorpage HR6X USB untested   plustek
(v0.45) 		sane-plustek
Colorpage HR7 USB stable   plustek
(v0.45) 		sane-plustek
Colorpage HR7LE USB untested   plustek
(v0.45) 		sane-plustek
ColorPage HR7X Slim USB unsupported Not supported. Vendor/product: 0x0458/0x2018. Is reported to use the GL646 chipset. See link for more details. unsupported
(v2003-05-25) 		?
Colorpage Vivid III USB unsupported Not supported. Vendor/product: 0x07b3/0x0001. Same ids as the Plustek OpticPro 1212U and older U12/UT12. Maybe the same chips are used? unsupported
(v2003-05-25) 		?
Colorpage Vivid III V2 Parport (SPP, EPP) stable Reported as PT12 plustek
(v0.45) 		sane-plustek
Colorpage Vivid Pro II Film Parport (SPP, EPP) stable Reported as OP9636T/12000T plustek
(v0.45) 		sane-plustek
Colorpage Vivid3x USB alpha Works but has limited testing gt68xx
(v1.0-46) 		sane-gt68xx
Colorpage Vivid3xe USB alpha Works but has limited testing. Color problems? Reports are welcome. gt68xx
(v1.0-46) 		sane-gt68xx
ColorPage-HR5 (Pro) SCSI stable OK, SCSI-ID=KYE ColorPage-HR5 umax
(v1.0-37) 		sane-umax
FS-1130 Colorpage Scanner SCSI untested   leo
(v1.0-10) 		sane-leo

Manufacturer: Guillemot / Hercules

Link(s): http://www.guillemot.com

Model Interface Status Comment Backend Manpage
Maxi Scan A4 Deluxe (SCSI) SCSI stable Rebadged SnapScan 310s. SnapScan
(v1.4) 		sane-snapscan
Maxi Scan A4 USB 640U USB stable Rebadged Benq 640U. SnapScan
(v1.4) 		sane-snapscan
Scan@home Touch 1248 (USB) USB stable Rebadged Benq 3300. SnapScan
(v1.4) 		sane-snapscan

Manufacturer: Hewlett-Packard

Link(s): http://www.hp.com, http://www.hp.com/

Model Interface Status Comment Backend Manpage
Photo Scanner 1000 USB unsupported Not supported by SANE. However, it's detected as mass storage device so just mounting it is reported to work. See link for devices data. unsupported
(v2003-05-25) 		?
PhotoSmart PhotoScanner SCSI stable   hp
(v1.02) 		sane-hp
ScanJet 3c SCSI stable   hp
(v1.02) 		sane-hp
ScanJet 3p SCSI stable   hp
(v1.02) 		sane-hp
ScanJet 4c SCSI stable   hp
(v1.02) 		sane-hp
ScanJet 4p SCSI stable   hp
(v1.02) 		sane-hp
ScanJet 5p SCSI stable   hp
(v1.02) 		sane-hp
ScanJet 5s Parport (EPP) alpha Requires libieee1284 library hpsj5s
(v0.03) 		sane-hpsj5s
ScanJet 2100C USB stable   plustek
(v0.45) 		sane-plustek
ScanJet 2200C USB stable   plustek
(v0.45) 		sane-plustek
ScanJet 2300C USB unsupported Unsupported. Vendor/product 0x03f0/0x0901. See link for devices output. unsupported
(v2003-05-25) 		?
Scanjet 3200C Parport (EPP) beta works (relabelled 1220P and 2000P) umax_pp
(v1) 		sane-umax_pp
ScanJet 3500c USB unsupported Unsupported. Seems to use RealTek RTS8801C2-6. Vendor/Product ID 0x03F0/0x2205. See link and other Scanjet 35x0c entries. unsupported
(v2003-05-25) 		?
ScanJet 3530c USB unsupported Unsupported. Chipset is Realtek RTS8801C2-6. Vendor/Product ID 0x03F0/0x2005. See link and other Scanjet 35x0c entries. unsupported
(v2003-05-25) 		?
ScanJet 3570c USB unsupported Unsupported. Probably Realtek RTS8801C2-6, same ids as Scanjet 3530c. Has a TA. Vendor/product id 0x03F0/0x2005. See link and other Scanjet 35x0c entries. unsupported
(v2003-05-25) 		?
ScanJet 3570cxi USB unsupported Unsupported. See 3570c. unsupported
(v2003-05-25) 		?
ScanJet 4100C USB stable   hp
(v1.02) 		sane-hp
ScanJet 4400C USB unsupported Not supported. Seems to use the same chip as the 4470C. A stand-alone program for that scanner is available. unsupported
(v2003-05-25) 		?
ScanJet 4470C USB unsupported Not supported. However, a stand-alone program is available. unsupported
(v2003-05-25) 		?
ScanJet 4500C USB unsupported Not supported. Landscape scanner. Same as 5500C, but without ADF. unsupported
(v2003-05-25) 		?
ScanJet 4570C USB unsupported Not supported. Portrait scanner with TA, similar to 4500C. Same as 5550C, but without ADF. Vendor/product: 0x03f0/0x1305. Not much is known about this scanner. The manual says: 4500c and 5500c series. unsupported
(v2003-05-25) 		?
ScanJet 5100C Parport stable Requires ppscsi driver and epst module hp
(v1.02) 		sane-hp
ScanJet 5200C Parport USB stable Parallel interface requires ppscsi driver and epst module hp
(v1.02) 		sane-hp
ScanJet 5300C USB stable 1 pass, 1200 dpi - regularly tested avision
(vBuild: 70) 		sane-avision
ScanJet 5370C USB alpha 1 pass, 2400 dpi avision
(vBuild: 70) 		sane-avision
ScanJet 5400c USB alpha   hp5400
(v1.0-2, NEW!) 		sane-hp5400
ScanJet 5470c USB alpha   hp5400
(v1.0-2, NEW!) 		sane-hp5400
ScanJet 5490c USB untested   hp5400
(v1.0-2, NEW!) 		sane-hp5400
ScanJet 5500C USB unsupported Not supported. Same as 4500C, but with ADF. unsupported
(v2003-05-25) 		?
ScanJet 5550C USB unsupported Not supported. Same as 4570C, but with ADF. unsupported
(v2003-05-25) 		?
ScanJet 6100C SCSI stable   hp
(v1.02) 		sane-hp
ScanJet 6200C SCSI USB stable   hp
(v1.02) 		sane-hp
ScanJet 6250C SCSI USB stable   hp
(v1.02) 		sane-hp
ScanJet 6300C SCSI USB stable   hp
(v1.02) 		sane-hp
ScanJet 6350C SCSI USB stable   hp
(v1.02) 		sane-hp
ScanJet 6390C SCSI USB stable   hp
(v1.02) 		sane-hp
ScanJet 7400c USB beta 1 pass, 1200 dpi - dual USB/SCSI interface avision
(vBuild: 70) 		sane-avision
ScanJet 7450c USB beta 1 pass, 1200 dpi - dual USB/SCSI interface avision
(vBuild: 70) 		sane-avision
ScanJet 7490c USB beta 1 pass, 1200 dpi - dual USB/SCSI interface avision
(vBuild: 70) 		sane-avision
ScanJet 8200C USB unsupported Not supported. SCSI optional. Includes TA. No further information. unsupported
(v2003-05-25) 		?
ScanJet 8250C USB unsupported Not supported. SCSI optional. Includes ADF and TA. Probably similar to 8200C. No further information. unsupported
(v2003-05-25) 		?
ScanJet 8290C USB unsupported Not supported. SCSI optional. Includes ADF and TA. Similar to 8200C? No further information. unsupported
(v2003-05-25) 		?
ScanJet IIc SCSI stable   hp
(v1.02) 		sane-hp
ScanJet IIcx SCSI stable   hp
(v1.02) 		sane-hp
ScanJet IIp SCSI stable   hp
(v1.02) 		sane-hp
ScanJet Plus Propietary stable Driver for HP parallel interface card required hp
(v1.02) 		sane-hp

Manufacturer: IBM

Link(s): http://www.ibm.com/, http://www.ibm.com

Model Interface Status Comment Backend Manpage
2456 SCSI alpha Was reported to work long time ago. Reports are welcome. ibm
(v1.0-4, NEW!) 		sane-ibm
ADF Color Scanner Proprietary unsupported Unsupported. Uses proprietary ISA card. Maybe the same as the Plustek Spectra ADF? unsupported
(v2003-05-25) 		?

Manufacturer: Komodo

Link(s): http://www.komodo.com/

Model Interface Status Comment Backend Manpage
S1200 SCSI untested rebadged Sceptre S1200 sceptre
(v1.0-10) 		sane-sceptre

Manufacturer: LEO

Model Interface Status Comment Backend Manpage
LEOScan S3 SCSI beta FCC ID LUZFS1130 leo
(v1.0-10) 		sane-leo

Manufacturer: Lexmark

Link(s): http://www.lexmark.com/

Model Interface Status Comment Backend Manpage
X70 USB beta works, some resolutions fail at 16 bit gt68xx
(v1.0-46) 		sane-gt68xx
X73 USB beta works, some resolutions fail at 16 bit, same as X70 gt68xx
(v1.0-46) 		sane-gt68xx
X83 USB unsupported Unsupported. Vendor/product 0x043d/0x003d. It does use a firmware (in some sort of eeprom(?), at least it's not necesary tu upload it). Probably parport over USB. Seems to use PAL16R8 and GL640USB_40SOJ chips. unsupported
(v2003-05-25) 		?

Manufacturer: Linotype Hell

Link(s): http://www.heidelberg.com/

Model Interface Status Comment Backend Manpage
Jade SCSI stable OK, SCSI-ID=LinoHell JADE umax
(v1.0-37) 		sane-umax
Jade SCSI stable OK, SCSI-ID=LinoHell Office umax
(v1.0-37) 		sane-umax
Jade2 SCSI stable OK, SCSI-ID=LinoHell Office2 umax
(v1.0-37) 		sane-umax
Linoscan 1400 SCSI stable OK, SCSI-ID=HDM LS4H1S umax
(v1.0-37) 		sane-umax
Opal SCSI untested support disabled until tested - please contact author umax
(v1.0-37) 		sane-umax
Opal Ultra SCSI untested support disabled until tested - please contact author umax
(v1.0-37) 		sane-umax
Saphir SCSI untested support disabled until tested - please contact author umax
(v1.0-37) 		sane-umax
Saphir HiRes SCSI untested support disabled until tested - please contact author umax
(v1.0-37) 		sane-umax
Saphir Ultra SCSI untested support disabled until tested - please contact author umax
(v1.0-37) 		sane-umax
Saphir Ultra II SCSI untested support disabled until tested - please contact author umax
(v1.0-37) 		sane-umax
Saphir2 SCSI stable OK, SCSI-ID=LinoHell SAPHIR2 umax
(v1.0-37) 		sane-umax
Saphir3 SCSI stable OK, SCSI-ID=LinoHell SAPHIR3 umax
(v1.0-37) 		sane-umax

Manufacturer: Medion/Lifetec/Tevion/Cytron

Link(s): http://www.medion.com, http://www.medion.de/, http://www.medion.com/
Comment: Sold by Aldi and Tchibo.

Model Interface Status Comment Backend Manpage
LT 9452 USB beta Similar to Mustek ScanExpress 1200 UB Plus gt68xx
(v1.0-46) 		sane-gt68xx
MD 4394 USB beta Product id 0x4002. If you have 0x4003, use artec_eplus48u backend. gt68xx
(v1.0-46) 		sane-gt68xx
MD 5345 USB unsupported Probably unsupported. Vendor/product 0x0461/0x0377. The vendor id is Primax. Same as MD 6228. Maybe the same as Primax Slim-Line 1200. unsupported
(v2003-05-25) 		?
MD 6228 USB unsupported Probably unsupported. Vendor/product 0x0461/0x0377. The vendor id is Primax. Same as MD 5345. Maybe the same as Primax Slim-Line 1200. unsupported
(v2003-05-25) 		?
MD 9458 USB beta Similar to Artec Ultima 2000 (e+?) gt68xx
(v1.0-46) 		sane-gt68xx
MD 9848 Parport (EPP) alpha 300 dpi CCD scanner mustek_pp
(v12) 		sane-mustek_pp
MD/LT 935x Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
MD/LT 985x Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
MD/LT 9375 USB untested Untested, but is reported to have the same ids as the Artec Ultima 2000. Please test. gt68xx
(v1.0-46) 		sane-gt68xx
MD/LT 9385 USB beta Similar to Artec Ultima 2000 gt68xx
(v1.0-46) 		sane-gt68xx
MD/LT 9890 Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
MD4394 USB beta Obviously two different scanners were sold under this name. Only scanners with product id 0x4003 will work; try the gt68xx backend otherwise artec_eplus48u
(v0.0.10) 		sane-artec_eplus48u
MD9693 USB beta   artec_eplus48u
(v0.0.10) 		sane-artec_eplus48u
MD9705 USB beta   artec_eplus48u
(v0.0.10) 		sane-artec_eplus48u

Manufacturer: Memorex

Link(s): http://www.artecusa.com/

Model Interface Status Comment Backend Manpage
MEM 48U USB beta Different product id: 0x4005 artec_eplus48u
(v0.0.10) 		sane-artec_eplus48u

Manufacturer: Microtek

Link(s): http://www.microtek.com/

Model Interface Status Comment Backend Manpage
Color PageWiz SCSI (Parport) beta sheet-fed (preliminary, see mapage) microtek
(v0.13.1) 		sane-microtek
Phantom 330CX Parport stable   microtek2
(v0.95) 		sane-microtek2
Phantom 636 SCSI stable   microtek2
(v0.95) 		sane-microtek2
Phantom 636CX Parport stable   microtek2
(v0.95) 		sane-microtek2
Scanmaker 35 SCSI beta slide-scanner microtek
(v0.13.1) 		sane-microtek
Scanmaker 35t+ SCSI beta slide-scanner microtek
(v0.13.1) 		sane-microtek
Scanmaker 45t SCSI beta slide-scanner microtek
(v0.13.1) 		sane-microtek
ScanMaker 330 SCSI alpha   microtek2
(v0.95) 		sane-microtek2
Scanmaker 600G(S) SCSI alpha gray only (see manpage) microtek
(v0.13.1) 		sane-microtek
Scanmaker 600Z(S) SCSI untested   microtek
(v0.13.1) 		sane-microtek
ScanMaker 630 SCSI alpha   microtek2
(v0.95) 		sane-microtek2
ScanMaker 636 SCSI stable   microtek2
(v0.95) 		sane-microtek2
ScanMaker 3600 USB alpha works sm3600
(v0.1) 		sane-sm3600
ScanMaker 3630 USB unsupported Unsupported. Doesn't seem to be compatible to 3600 series, see link. unsupported
(v2003-05-25) 		?
ScanMaker 3700 USB alpha works sm3600
(v0.1) 		sane-sm3600
ScanMaker 3750 USB alpha works (told) sm3600
(v0.1) 		sane-sm3600
ScanMaker 3800 USB unsupported Unsupported. Vendor/Product ids: 0x05da/0x30ce. Seems to be based on the SQ Scan08 chip. See link to spec sheet. unsupported
(v2003-05-25) 		?
ScanMaker 4800 USB unsupported Unsupported. Vendor/Product ids: 0x05da/0x30cf. Looks very similar to the ScanMaker 3800. Maybe the same chip is used? unsupported
(v2003-05-25) 		?
ScanMaker 9600XL SCSI alpha   microtek2
(v0.95) 		sane-microtek2
ScanMaker 9600XL SCSI stable only flatbed mode ? microtek2
(v0.95) 		sane-microtek2
Scanmaker E2 SCSI beta 3-pass microtek
(v0.13.1) 		sane-microtek
Scanmaker E3 SCSI beta   microtek
(v0.13.1) 		sane-microtek
ScanMaker E3plus SCSI stable   microtek2
(v0.95) 		sane-microtek2
ScanMaker E3plus Parport stable   microtek2
(v0.95) 		sane-microtek2
Scanmaker E6 SCSI stable   microtek
(v0.13.1) 		sane-microtek
Scanmaker II SCSI beta 3-pass microtek
(v0.13.1) 		sane-microtek
Scanmaker IIG SCSI beta gray only microtek
(v0.13.1) 		sane-microtek
Scanmaker IIHR SCSI beta 3-pass microtek
(v0.13.1) 		sane-microtek
Scanmaker III SCSI beta   microtek
(v0.13.1) 		sane-microtek
Scanmaker IISP SCSI beta   microtek
(v0.13.1) 		sane-microtek
ScanMaker V6USL USB stable   microtek2
(v0.95) 		sane-microtek2
ScanMaker V6USL SCSI stable   microtek2
(v0.95) 		sane-microtek2
ScanMaker V300 Parport beta   microtek2
(v0.95) 		sane-microtek2
ScanMaker V300 SCSI beta   microtek2
(v0.95) 		sane-microtek2
ScanMaker V310 Parport alpha   microtek2
(v0.95) 		sane-microtek2
ScanMaker V310 SCSI alpha   microtek2
(v0.95) 		sane-microtek2
ScanMaker V600 Parport alpha   microtek2
(v0.95) 		sane-microtek2
ScanMaker V600 SCSI alpha   microtek2
(v0.95) 		sane-microtek2
ScanMaker X6 SCSI stable   microtek2
(v0.95) 		sane-microtek2
ScanMaker X6EL SCSI alpha   microtek2
(v0.95) 		sane-microtek2
ScanMaker X6USB USB beta   microtek2
(v0.95) 		sane-microtek2
ScanMaker X12USL SCSI beta only Flatbed mode ? microtek2
(v0.95) 		sane-microtek2
ScanPort 3000 USB unsupported Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Visioneer OneTouch 4800. See link for details. unsupported
(v2003-05-25) 		?
SlimScan C3 Parport stable   microtek2
(v0.95) 		sane-microtek2
SlimScan C6 USB stable   microtek2
(v0.95) 		sane-microtek2

Manufacturer: Minolta

Link(s): http://www.minolta.com

Model Interface Status Comment Backend Manpage
Elite II USB untested 1 pass, film-scanner avision
(vBuild: 70) 		sane-avision
FS-V1 USB alpha 1 pass, film-scanner avision
(vBuild: 70) 		sane-avision

Manufacturer: Mitsubishi

Link(s): http://www.mitsubishi.com

Model Interface Status Comment Backend Manpage
Diamondview 648UT USB stable Rebadged Benq 320u. SnapScan
(v1.4) 		sane-snapscan
Diamondview 650U USB stable Rebadged Benq 4300. SnapScan
(v1.4) 		sane-snapscan
MCA-ADFC SCSI untested   avision
(vBuild: 70) 		sane-avision
S600C SCSI untested   avision
(vBuild: 70) 		sane-avision
S1200C SCSI untested   avision
(vBuild: 70) 		sane-avision
SS600 SCSI beta   avision
(vBuild: 70) 		sane-avision

Manufacturer: Mustek

Link(s): http://www.mustek.com/, http://www.mustek.com.tw/, http://www.mustek.de/

Model Interface Status Comment Backend Manpage
600 III EP Plus Parport (EPP) alpha 300 dpi CCD scanner mustek_pp
(v12) 		sane-mustek_pp
1800 A3 Pro-1 USB unsupported Not supported but someone wants to start writing a backend. See link. Vendor/Product ids: 0x055f/0x0401. No information about this scanner on any Mustek website. unsupported
(v2003-05-25) 		?
2400 M USB unsupported Probably unsupported. No details known. unsupported
(v2003-05-25) 		?
BearPaw 1200 USB stable   plustek
(v0.45) 		sane-plustek
BearPaw 1200 CS USB beta   gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 1200 CU USB beta   gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 1200 CU Plus USB beta   gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 1200 F USB alpha Works upto 600 dpi. No support for TA and ADF yet. ma1509
(v1.0-2, NEW!) 		sane-ma1509
BearPaw 1200 TA USB beta Transparency adapter supported gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 1248CU USB unsupported Probably unsupported. No details known. unsupported
(v2003-05-25) 		?
BearPaw 2400 USB stable Mostly OK plustek
(v0.45) 		sane-plustek
BearPaw 2400 CS USB untested probably works, reports are welcome gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 2400 CS Plus USB beta works, problems with 12/16 bit modes? gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 2400 CU USB alpha works, but is slow gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 2400 CU Plus USB beta   gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 2400 TA USB beta Transparency adapter supported gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 2400 TA Plus USB beta Transparency adapter supported gt68xx
(v1.0-46) 		sane-gt68xx
BearPaw 2400 TA Pro USB unsupported Not supported. See link for some information. unsupported
(v2003-05-25) 		?
BearPaw 4800 TA Pro USB unsupported Not supported. See link for some information. unsupported
(v2003-05-25) 		?
P 3600 A3 Pro USB unsupported Not supported. Maybe similar to the 1800 A3 Pro-1?. See link. unsupported
(v2003-05-25) 		?
Paragon 600 II CD SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon 600 II ED/EP Parport unsupported Not supported. SCSI over Parport. unsupported
(v2003-05-25) 		?
Paragon 600 II N Proprietary stable   mustek
(v1.0-132) 		sane-mustek
Paragon 800 II SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon 1200 A3 Pro SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon 1200 III SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon 1200 LS SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon 1200 SP Pro SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon MFC-600S SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon MFC-800S SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon MFS-1200SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon MFS-6000CX SCSI stable 3-pass mustek
(v1.0-132) 		sane-mustek
Paragon MFS-6000SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon MFS-8000SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
Paragon MFS-12000CX SCSI stable 3-pass mustek
(v1.0-132) 		sane-mustek
Paragon MFS-12000SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
ScanExpress 600 CP Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
ScanExpress 600 CU USB stable   mustek_usb
(v1.0-16) 		sane-mustek_usb
ScanExpress 600 SEP Parport (EPP) alpha 300 dpi CCD scanner mustek_pp
(v12) 		sane-mustek_pp
ScanExpress 600 USB USB unsupported Unsupported. Vendor/Product 0x055f/0x873. Programming information is available. unsupported
(v2003-05-25) 		?
ScanExpress 1200 CP Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
ScanExpress 1200 CP+ Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
ScanExpress 1200 CU USB stable   mustek_usb
(v1.0-16) 		sane-mustek_usb
ScanExpress 1200 CU Plus USB stable   mustek_usb
(v1.0-16) 		sane-mustek_usb
ScanExpress 1200 UB USB stable For the UB Plus, see gt68xx backend mustek_usb
(v1.0-16) 		sane-mustek_usb
ScanExpress 1200 UB Plus USB beta   gt68xx
(v1.0-46) 		sane-gt68xx
ScanExpress 1200 USB USB unsupported Unsupported. Vendor/Product 0x055f/0x0003. Programming information is available. unsupported
(v2003-05-25) 		?
ScanExpress 1200 USB Plus USB unsupported Unsupported. Vendor/Product 0x055f/0x0007. unsupported
(v2003-05-25) 		?
ScanExpress 2400 USB USB untested Should be detected but may need some more work in the code. Testers welcome. gt68xx
(v1.0-46) 		sane-gt68xx
ScanExpress 6000 P Parport (EPP) alpha 300 dpi CCD scanner mustek_pp
(v12) 		sane-mustek_pp
ScanExpress 6000SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
ScanExpress 12000 P Parport unsupported Not supported. Asic 1505/05. unsupported
(v2003-05-25) 		?
ScanExpress 12000SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
ScanExpress 12000SP Plus SCSI stable   mustek
(v1.0-132) 		sane-mustek
ScanExpress A3 SP SCSI beta Please test! mustek
(v1.0-132) 		sane-mustek
ScanExpress A3 USB USB alpha Calibration may be wrong. Please contact me if you have such a device. gt68xx
(v1.0-46) 		sane-gt68xx
ScanExpress CardSmart USB unsupported Probably unsupported. USB business card scanner. Maybe works as USB storage device? unsupported
(v2003-05-25) 		?
ScanMagic 600 CP Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
ScanMagic 600 II SP SCSI stable   mustek
(v1.0-132) 		sane-mustek
ScanMagic 4800 P Parport (EPP) alpha 300 dpi CCD scanner mustek_pp
(v12) 		sane-mustek_pp
ScanMagic 9636P Parport unsupported Probably not supported. Same as Mustek 12000 P?. ASIC 1505. unsupported
(v2003-05-25) 		?
ScanMagic 9636S SCSI stable   mustek
(v1.0-132) 		sane-mustek
ScanMagic 9636S Plus SCSI stable   mustek
(v1.0-132) 		sane-mustek

Manufacturer: NEC

Link(s): http://www.nevt.co.jp/

Model Interface Status Comment Backend Manpage
PC-IN500/4C SCSI beta PC-IN500/4C was sold only in JAPAN nec
(v0.12) 		sane-nec

Manufacturer: Nikon

Link(s): http://www.nikon.com/

Model Interface Status Comment Backend Manpage
AX-110 / Scantouch 110 SCSI untested may work, please test and give feedback umax
(v1.0-37) 		sane-umax
AX-210 SCSI stable OK umax
(v1.0-37) 		sane-umax
LS 30 SCSI beta working -- model available to developer coolscan2
(v0.1.8) 		sane-coolscan2
LS 40 ED USB beta   coolscan2
(v0.1.8) 		sane-coolscan2
LS 2000 SCSI beta   coolscan2
(v0.1.8) 		sane-coolscan2
LS 4000 ED IEEE1394 beta needs linux kernel 2.4.19 or later coolscan2
(v0.1.8) 		sane-coolscan2
LS 8000 ED IEEE1394 beta needs linux kernel 2.4.19 or later coolscan2
(v0.1.8) 		sane-coolscan2
LS-20 SCSI alpha The LS-20 has been replaced by the LS-30 coolscan
(v0.4.3) 		sane-coolscan
LS-30 SCSI alpha alpha: only 24/30 bit RGB + 32/40 bit RGBI coolscan
(v0.4.3) 		sane-coolscan
LS-1000 SCSI alpha Doesn't support gamma correction coolscan
(v0.4.3) 		sane-coolscan
LS-2000 SCSI alpha alpha: only 24/36 bit + RGB 32/48 bit RGBI coolscan
(v0.4.3) 		sane-coolscan

Manufacturer: Packard Bell

Model Interface Status Comment Backend Manpage
Diamond 1200 USB beta similar to Mustek BearPaw 1200 (Plus) gt68xx
(v1.0-46) 		sane-gt68xx
Diamond 1200 Plus USB beta similar to Mustek BearPaw 1200 Plus gt68xx
(v1.0-46) 		sane-gt68xx

Manufacturer: Panasonic

Link(s): http://www.panasonic.com/

Model Interface Status Comment Backend Manpage
KV-SS25 SCSI stable   matsushita
(v1.0-6) 		sane-matsushita
KV-SS25D SCSI stable   matsushita
(v1.0-6) 		sane-matsushita
KV-SS50 SCSI untested   matsushita
(v1.0-6) 		sane-matsushita
KV-SS50EX SCSI untested   matsushita
(v1.0-6) 		sane-matsushita
KV-SS55 SCSI untested   matsushita
(v1.0-6) 		sane-matsushita
KV-SS55EX SCSI untested   matsushita
(v1.0-6) 		sane-matsushita
KV-SS850 SCSI untested   matsushita
(v1.0-6) 		sane-matsushita
KV-SS855 SCSI untested   matsushita
(v1.0-6) 		sane-matsushita

Manufacturer: PIE

Link(s): http://www.scanace.com/
Comment: Pacific Image Electronics

Model Interface Status Comment Backend Manpage
Primefilm 1800u USB unsupported Not supported. Vendor/product 0x05e3/0x0120. Is reported to use GeneScan II GL841 chipset. unsupported
(v2003-05-25) 		?
ScanAce 630S SCSI untested   pie
(v1.0) 		sane-pie
ScanAce 636S SCSI untested   pie
(v1.0) 		sane-pie
ScanAce 1230S SCSI stable   pie
(v1.0) 		sane-pie
ScanAce 1236S SCSI stable   pie
(v1.0) 		sane-pie
ScanAce II SCSI untested   pie
(v1.0) 		sane-pie
ScanAce II Plus SCSI untested   pie
(v1.0) 		sane-pie
ScanAce III SCSI untested   pie
(v1.0) 		sane-pie
ScanAce III Plus SCSI untested   pie
(v1.0) 		sane-pie
ScanAce Plus SCSI untested   pie
(v1.0) 		sane-pie
ScanAce ScanMedia SCSI untested   pie
(v1.0) 		sane-pie
ScanAce ScanMedia II SCSI untested   pie
(v1.0) 		sane-pie
ScanAce V SCSI untested   pie
(v1.0) 		sane-pie

Manufacturer: PIOTECH

Link(s): http://www.image-land.com/

Model Interface Status Comment Backend Manpage
Splendeur 3024 SCSI beta sub model VM3552 teco3
(v1.0-1) 		sane-teco3

Manufacturer: Plustek

Link(s): http://www.plustek.com/, http://www.plustek.de/

Model Interface Status Comment Backend Manpage
OpticPro 600P/6000P Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 1212U USB unsupported Vendor/product: 0x07b3/0x0001. Same ids as early U12/UT12 models, maybe the same chip? unsupported
(v2003-05-25) 		?
OpticPro 1236P Parport (SPP, EPP) stable reported as OpticPro 12000P/96000P plustek
(v0.45) 		sane-plustek
OpticPro 1248U USB beta Works up to 600 dpi gt68xx
(v1.0-46) 		sane-gt68xx
OpticPro 2400SP SCSI untested sub model VM3552 teco3
(v1.0-1) 		sane-teco3
OpticPro 4800P Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 4830P Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 4831P Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 9600P Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 9630P Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 9630PL Parport (SPP, EPP) stable use driver-switch mov=1 plustek
(v0.45) 		sane-plustek
OpticPro 9636P Parport (SPP, EPP) stable use driver-switch mov=4 plustek
(v0.45) 		sane-plustek
OpticPro 9636P+/Turbo Parport (SPP, EPP) stable use driver-switch mov=3 plustek
(v0.45) 		sane-plustek
OpticPro 9636T Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 12000P/96000P Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 12000T Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro 19200S SCSI stable rebadged Artec AM12S artec
(v0.5.16) 		sane-artec
OpticPro A3U USB unsupported Uses Plustek ASIC P99002 unsupported
(v2003-05-25) 		?
OpticPro AI3 Parport (SPP, EPP) beta use driver-switch mov=5, poor picture quality plustek
(v0.45) 		sane-plustek
OpticPro P8 Parport untested   plustek
(v0.45) 		sane-plustek
OpticPro P12 Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro PT12 Parport (SPP, EPP) stable   plustek
(v0.45) 		sane-plustek
OpticPro S6 USB unsupported Uses RealTek chipset (RTL8801D) unsupported
(v2003-05-25) 		?
OpticPro S12 USB unsupported Uses the Genesys Logic GL646 chipset. unsupported
(v2003-05-25) 		?
OpticPro S24 USB unsupported Uses the Genesys Logic GL646 chipset. unsupported
(v2003-05-25) 		?
OpticPro U12 USB stable NOTE: Devices with product ID 0x0001 are not supported! plustek
(v0.45) 		sane-plustek
OpticPro U12/UT12 USB unsupported All devices using product ID 0x0001 are not supported, for others see Plustek backend. The older models seem to use a P98003 parallel port ASIC and a GenesysLogic parport-over USB brigde. The P98003 is also used by the P12 and PT12 models. unsupported
(v2003-05-25) 		?
OpticPro U24 USB stable   plustek
(v0.45) 		sane-plustek
OpticPro UT12 USB stable Note: Devices with product ID 0x0001 are not supported! plustek
(v0.45) 		sane-plustek
OpticPro UT16 USB stable   plustek
(v0.45) 		sane-plustek
OpticPro UT16B USB untested Isn't detected yet but may work some time in future. Testers welcome. gt68xx
(v1.0-46) 		sane-gt68xx
OpticPro UT24 USB stable   plustek
(v0.45) 		sane-plustek
Spectra ADF Proprietary unsupported Unsupported. Uses proprietary ISA card that also provides power and is labelled GPS-1 PAGE-A from Taiwan. Other labels on the scanner include ADF Color Scanner and SF600AS. Maybe the same as the IBM ADF Color Scanner? unsupported
(v2003-05-25) 		?

Manufacturer: Primax

Link(s): http://www.primax.nl/

Model Interface Status Comment Backend Manpage
Colorado 2400U USB unsupported Probably unsupported. ASIC EICI 10440A. Vendor/product 0x461/0x346. May work with viceo backend(?), see link. unsupported
(v2003-05-25) 		?
Colorado 4800 Parport (SPP, EPP) untested same as OpticPro 4800P plustek
(v0.45) 		sane-plustek
Colorado Direct 600 Parport unsupported Not supported. However, a stand-alone program is available. unsupported
(v2003-05-25) 		?
Colorado Direct 9600 Parport unsupported Not supported. However, a stand-alone program is available. unsupported
(v2003-05-25) 		?
Compact 4800 Direct Parport (SPP, EPP) stable use driver-switch mov=2 plustek
(v0.45) 		sane-plustek
Compact 4800 Direct-30 Parport (SPP, EPP) untested same as OpticPro 4830P plustek
(v0.45) 		sane-plustek
Compact 4800 SCSI SCSI stable Mustek 600 II CD compatible mustek
(v1.0-132) 		sane-mustek
Compact 9600 Direct-30 Parport (SPP, EPP) stable same as OpticPro 9630P plustek
(v0.45) 		sane-plustek
Jewel 4800 SCSI alpha sub model VM356A teco2
(v1.0-5) 		sane-teco2
Primascan Colorado 2600u USB unsupported Unsupported. See Visioneer Primascan Onetouch 4800. unsupported
(v2003-05-25) 		?
Profi 9600 SCSI alpha sub model VM6575 teco2
(v1.0-5) 		sane-teco2
Profi 19200 SCSI beta sub model VM6586 teco2
(v1.0-5) 		sane-teco2
Slim-Line 1200 USB unsupported Probably unsupported. Vendor/product maybe 0x0461/0x0377. Maybe the same as Medion MD 6228/MD 5345 unsupported
(v2003-05-25) 		?

Manufacturer: Prolink

Link(s): http://www.fida.com/

Model Interface Status Comment Backend Manpage
Winscan Pro 2448U USB unsupported Not supported. Some information is available. Vendor=0x06dc product=0x0014. Is reported to use an RealTek RTS8801 chipset. unsupported
(v2003-05-25) 		?

Manufacturer: Reflecta

Model Interface Status Comment Backend Manpage
DigitDia 3600 USB IEEE-1394 unsupported Probably unsupported. Film scanner that can scan directly from the magazine. unsupported
(v2003-05-25) 		?

Manufacturer: Relisys

Link(s): http://www.relisys.com/, http://www.tecoimage.com.tw/

Model Interface Status Comment Backend Manpage
APOLLO Express 3 SCSI alpha sub model VM356A teco2
(v1.0-5) 		sane-teco2
APOLLO Express 6 SCSI beta sub model VM6565 teco2
(v1.0-5) 		sane-teco2
AVEC 2400 SCSI stable sub model VM3520 teco1
(v1.0-9) 		sane-teco1
AVEC 2412 SCSI untested sub model VM3520+ teco1
(v1.0-9) 		sane-teco1
AVEC 4800 SCSI untested sub model VM4530 teco1
(v1.0-9) 		sane-teco1
AVEC 4816 SCSI untested sub model VM4530+ teco1
(v1.0-9) 		sane-teco1
AVEC II S3 SCSI alpha sub model VM3564 teco2
(v1.0-5) 		sane-teco2
AVEC Super 3 SCSI untested sub model VM3575 teco2
(v1.0-5) 		sane-teco2
Infinity Scorpio SCSI beta sub model VM3552 teco3
(v1.0-1) 		sane-teco3
RELI 2400 SCSI untested sub model VM3530 teco1
(v1.0-9) 		sane-teco1
RELI 2412 SCSI stable sub model VM3530+ teco1
(v1.0-9) 		sane-teco1
RELI 4816 SCSI untested sub model VM4540 teco1
(v1.0-9) 		sane-teco1
RELI 4830 SCSI beta sub model VM4542 teco1
(v1.0-9) 		sane-teco1
RELI 9600 SCSI untested sub model VM6530 teco1
(v1.0-9) 		sane-teco1
RELI 9612 SCSI untested sub model VM6530* teco1
(v1.0-9) 		sane-teco1
RELI 9624 SCSI untested sub model VM6530+ teco1
(v1.0-9) 		sane-teco1
RELI 9630 SCSI untested sub model VM6540 teco1
(v1.0-9) 		sane-teco1
RELI DS6 SCSI untested sub model VM3420 teco1
(v1.0-9) 		sane-teco1
RELI DS15 SCSI untested sub model VM3440 teco1
(v1.0-9) 		sane-teco1
SCORPIO Pro SCSI beta sub model VM6575 teco2
(v1.0-5) 		sane-teco2
SCORPIO Pro-S SCSI untested sub model VM6586 teco2
(v1.0-5) 		sane-teco2
SCORPIO Super 3 SCSI alpha sub model VM3575 teco2
(v1.0-5) 		sane-teco2

Manufacturer: Ricoh

Link(s): http://www.ricoh.com/

Model Interface Status Comment Backend Manpage
IS-410 SCSI untested Untested, please report! ibm
(v1.0-4, NEW!) 		sane-ibm
IS-420 SCSI alpha Works at least in flatbed mode. ibm
(v1.0-4, NEW!) 		sane-ibm
IS-430 SCSI untested Untested, please report! ibm
(v1.0-4, NEW!) 		sane-ibm
Ricoh IS50 SCSI alpha   ricoh sane-ricoh
Ricoh IS60 SCSI alpha   ricoh sane-ricoh

Manufacturer: Scanport

Link(s): http://www.scanport.com/

Model Interface Status Comment Backend Manpage
SQ300 Parport? alpha   microtek2
(v0.95) 		sane-microtek2
SQ2030 Parport alpha   microtek2
(v0.95) 		sane-microtek2
SQ4836 SCSI alpha   microtek2
(v0.95) 		sane-microtek2

Manufacturer: Sceptre

Link(s): http://www.sceptre.com/

Model Interface Status Comment Backend Manpage
Vividscan S1200 SCSI beta   sceptre
(v1.0-10) 		sane-sceptre

Manufacturer: Sharp

Link(s): http://sharp-world.com/

Model Interface Status Comment Backend Manpage
JX-250 SCSI beta   sharp
(v0.32) 		sane-sharp
JX-320 SCSI beta   sharp
(v0.32) 		sane-sharp
JX-325 SCSI untested   sharp
(v0.32) 		sane-sharp
JX-330 SCSI beta   sharp
(v0.32) 		sane-sharp
JX-350 SCSI beta   sharp
(v0.32) 		sane-sharp
JX-610 SCSI beta   sharp
(v0.32) 		sane-sharp

Manufacturer: Siemens

Link(s): http://www.siemens.com/, http://www.siemens.de/

Model Interface Status Comment Backend Manpage
9036 Flatbed scanner SCSI alpha   s9036 sane-s9036
S9036 SCSI untested gray only agfafocus
(v0.2) 		sane-agfafocus
ST400 SCSI alpha 6 bit gray st400
(v1.6) 		sane-st400
ST800 SCSI alpha 6 bit gray st400
(v1.6) 		sane-st400

Manufacturer: Spot Technology

Comment: Spot seems have gone out of business.

Model Interface Status Comment Backend Manpage
Maxiscan A4 proprietary unsupported Not supported until now. Work on a backend has started, see link for more information. unsupported
(v2003-05-25) 		?
ScanTak 2c SCSI unsupported Not supported. See link for more information. unsupported
(v2003-05-25) 		?
ScanTak 3c SCSI unsupported Not supported. See link for more information. unsupported
(v2003-05-25) 		?

Manufacturer: Syscan

Model Interface Status Comment Backend Manpage
TravelScan 460/464 USB unsupported Not supported. Some information is available. May work with the Plustek backend in future. unsupported
(v2003-05-25) 		?

Manufacturer: Tamarack

Link(s): http://www.tamarack.net/

Model Interface Status Comment Backend Manpage
Artiscan 6000C SCSI beta 3 pass, 300 DPI tamarack
(v0.5) 		sane-tamarack
Artiscan 8000C SCSI beta 3 pass, 400 DPI tamarack
(v0.5) 		sane-tamarack
Artiscan 12000C SCSI beta 3 pass, 600 DPI tamarack
(v0.5) 		sane-tamarack

Manufacturer: Targa

Model Interface Status Comment Backend Manpage
Funline TS6 EP Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
Funline TS12 EP Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp

Manufacturer: Trust

Link(s): http://www.trust-site.com, http://www.trust-site.com/home/
Comment: Carefully check the model names. Trust uses similar names for completely different hardware.

Model Interface Status Comment Backend Manpage
CombiScan 19200 Parport USB unsupported Unsupported. Vendor/product 0x5cb, 0x1483 according to linux-usb.org. Same ids as Boeder Sm@rtScan Office. The vendor is PowerVision Technologies, Inc. Maybe also a PV8630 as in the UMAX 1200U? unsupported
(v2003-05-25) 		?
Compact Scan USB 19200 USB stable Mustek 1200 UB compatible mustek_usb
(v1.0-16) 		sane-mustek_usb
Compact Scan USB 19200 USB beta works, if you have vendor id 0x055f and product id 0x0006, use the mustek_usb backend instead, similar to Mustek ScanExpress 1200 UB (Plus) gt68xx
(v1.0-46) 		sane-gt68xx
Easy Connect 9600+ Parport (EPP) beta CIS scanner mustek_pp
(v12) 		sane-mustek_pp
Easy Webscan 19200 USB beta Different product id: 0x4006 artec_eplus48u
(v0.0.10) 		sane-artec_eplus48u
Flat Scan USB 19200 USB beta Similar to Artec Ultima 2000 gt68xx
(v1.0-46) 		sane-gt68xx
Imagery 1200 SCSI stable 3-pass, Mustek Paragon MFS-6000CX compatible mustek
(v1.0-132) 		sane-mustek
Imagery 1200 SP SCSI stable Mustek Paragon MFS-6000SP compatible mustek
(v1.0-132) 		sane-mustek
Imagery 2400 SP SCSI beta sub model VM3552 teco3
(v1.0-1) 		sane-teco3
Imagery 4800 SP SCSI stable Mustek Paragon 500 II CD compatible mustek
(v1.0-132) 		sane-mustek
Imagery 4800 SP+ SCSI beta sub model VM3552 teco3
(v1.0-1) 		sane-teco3
Imagery 9600 SP SCSI untested sub model VM3552 teco3
(v1.0-1) 		sane-teco3
SCSI Connect 19200 SCSI stable Mustek ScanExpress 12000SP compatible mustek
(v1.0-132) 		sane-mustek
SCSI excellence series 19200 SCSI stable Mustek ScanExpress 12000SP compatible mustek
(v1.0-132) 		sane-mustek

Manufacturer: UMAX

Link(s): http://www.umax.com/, http://www.umax.com.tw/, http://www.umax.de/en, http://www.umax-europe.com, http://www.umaxjapan.co.jp, http://www.umax.com.cn

Model Interface Status Comment Backend Manpage
Astra 600S SCSI stable OK umax
(v1.0-37) 		sane-umax
Astra 610P Parport (EPP) unsupported don't work (yet) umax_pp
(v1) 		sane-umax_pp
Astra 610S SCSI stable OK umax
(v1.0-37) 		sane-umax
Astra 1200S SCSI stable OK umax
(v1.0-37) 		sane-umax
Astra 1220P Parport (EPP) beta works umax_pp
(v1) 		sane-umax_pp
Astra 1220S SCSI stable OK umax
(v1.0-37) 		sane-umax
Astra 1220U USB stable OK umax1220u
(v1.0.1) 		sane-umax1220u
Astra 1600P Parport (EPP) beta works umax_pp
(v1) 		sane-umax_pp
Astra 2000P Parport (EPP) beta works umax_pp
(v1) 		sane-umax_pp
Astra 2000U USB beta Sort of scans, but colors all messed up. umax1220u
(v1.0.1) 		sane-umax1220u
Astra 2100S SCSI stable OK umax
(v1.0-37) 		sane-umax
Astra 2200 (SU) USB stable OK, needs USB control messages umax
(v1.0-37) 		sane-umax
Astra 2200 (SU) SCSI stable OK umax
(v1.0-37) 		sane-umax
Astra 2200U USB unsupported Incompatible. umax1220u
(v1.0.1) 		sane-umax1220u
Astra 2400S SCSI stable OK umax
(v1.0-37) 		sane-umax
Astra 4500 USB unsupported Not supported. Vendor/product 0x0638/0x0a10. Is reported to use GeneScan II GL646 chipset. Same as Avision iVina FB1600. unsupported
(v2003-05-25) 		?
Astra 4700 USB unsupported Not supported. Is reported to use a Genesys Logic GL660USB chip (Parport to USB converter, see link) and the Avision B2 chipset. Same as Avision iVina FB1800. unsupported
(v2003-05-25) 		?
Astra 6400 IEEE-1394 unsupported will propably work one day umax
(v1.0-37) 		sane-umax
Astra 6450 IEEE-1394 unsupported will propably work one day umax
(v1.0-37) 		sane-umax
Astra 6700 USB unsupported Not supported. No chipset information available. Same as Avision iVina FB2400. unsupported
(v2003-05-25) 		?
Astra MX3 USB stable OK, needs USB control messages umax
(v1.0-37) 		sane-umax
Astra MX3 SCSI stable OK umax
(v1.0-37) 		sane-umax
AstraSlim SE USB beta Different product id: 0x4009 artec_eplus48u
(v0.0.10) 		sane-artec_eplus48u
Gemini D-16 SCSI stable OK umax
(v1.0-37) 		sane-umax
Mirage D-16L SCSI stable OK umax
(v1.0-37) 		sane-umax
Mirage II SCSI stable OK umax
(v1.0-37) 		sane-umax
Mirage IIse SCSI untested may work, please test and give feedback umax
(v1.0-37) 		sane-umax
PL-II SCSI untested may work, please test and give feedback umax
(v1.0-37) 		sane-umax
PowerLook SCSI untested may work, please test and give feedback umax
(v1.0-37) 		sane-umax
PowerLook 270 SCSI unsupported incompatible umax
(v1.0-37) 		sane-umax
PowerLook 270plus SCSI unsupported incompatible umax
(v1.0-37) 		sane-umax
PowerLook 1100 IEEE-1394 unsupported will propably work one day umax
(v1.0-37) 		sane-umax
PowerLook 2000 SCSI untested may work, please test and give feedback umax
(v1.0-37) 		sane-umax
PowerLook 2100XL SCSI stable OK umax
(v1.0-37) 		sane-umax
PowerLook 3000 SCSI stable OK umax
(v1.0-37) 		sane-umax
PowerLook III SCSI stable OK umax
(v1.0-37) 		sane-umax
PSD SCSI stable OK umax
(v1.0-37) 		sane-umax
Supervista S-12 SCSI stable OK umax
(v1.0-37) 		sane-umax
UC 630 SCSI stable Version 2.8 OK, others only lineart OK umax
(v1.0-37) 		sane-umax
UC 840 SCSI stable Version 1.6 OK, others only lineart OK umax
(v1.0-37) 		sane-umax
UC 1200S SCSI untested may work, please test and give feedback umax
(v1.0-37) 		sane-umax
UC 1200SE SCSI stable Version 3.0 OK, others unknown umax
(v1.0-37) 		sane-umax
UC 1260 SCSI stable Version 1.6 OK, others unknown umax
(v1.0-37) 		sane-umax
UG 80 SCSI stable OK umax
(v1.0-37) 		sane-umax
UG 630 SCSI stable OK umax
(v1.0-37) 		sane-umax
UMAX 3400 USB stable   plustek
(v0.45) 		sane-plustek
UMAX 3450 USB stable TPA not supported plustek
(v0.45) 		sane-plustek
UMAX 5400 USB stable   plustek
(v0.45) 		sane-plustek
UMAX S-6E SCSI stable OK umax
(v1.0-37) 		sane-umax
UMAX S-6EG SCSI stable OK umax
(v1.0-37) 		sane-umax
UMAX S-12 SCSI stable OK umax
(v1.0-37) 		sane-umax
UMAX S-12G SCSI stable OK umax
(v1.0-37) 		sane-umax
UMAX VT600 SCSI untested may work, please test and give feedback umax
(v1.0-37) 		sane-umax
Vista S6 SCSI stable OK umax
(v1.0-37) 		sane-umax
Vista S6E SCSI stable OK umax
(v1.0-37) 		sane-umax
Vista-S8 SCSI stable OK umax
(v1.0-37) 		sane-umax
Vista-T630 SCSI stable OK for some firmwareversions, on others only lineart OK umax
(v1.0-37) 		sane-umax

Manufacturer: Visioneer

Link(s): http://www.visioneer.com/

Model Interface Status Comment Backend Manpage
6200 USB unsupported Not supported. Is reported to use the E5 chipset. Uses a Primax ID. See link for some details. Looks similar to Primascan Colorado 2600u. unsupported
(v2003-05-25) 		?
Onetouch 4400 USB unsupported Not supported. Is reported to use LM9832 (or LM9830 + E5) (=GL640usb)???. Same scanner as Primax/visioneer Primascan Colorado 2600u. Vendor/product 0x0461/0x0347 (Primax!). One bulk-in and one bulk-out ep. See link for more details. Maybe it can be supported by the canon630u backend? unsupported
(v2003-05-25) 		?
OneTouch 4800 USB USB unsupported Unsupported. Vendor/Product ids: 0x04a7/0x0224. Seems to use Realtek RTS8801B. Same as Microtek Scanport 3000. See link for details. unsupported
(v2003-05-25) 		?
OneTouch 5300 USB USB unsupported Not supported. Vendor/product ids 0x04a7/0x0226. See link for output of /proc/bus/usb/devices. The output looks very similar to that of the 8920. unsupported
(v2003-05-25) 		?
Onetouch 8920 USB unsupported Not supported. Same as 8700 and 8900 but includes a TA. Uses a Primax ID. See link for output of /proc/bus/usb/devices. unsupported
(v2003-05-25) 		?
Primascan Colorado 2600u USB unsupported Not supported. See Visioneer Onetouch 4400. unsupported
(v2003-05-25) 		?

Manufacturer: Viviscan

Model Interface Status Comment Backend Manpage
Compact II Parport (EPP) alpha 300 dpi CCD scanner mustek_pp
(v12) 		sane-mustek_pp

Manufacturer: Vobis

Link(s): http://www.vobis.de/

Model Interface Status Comment Backend Manpage
HighScan SCSI stable only E3plus based models microtek2
(v0.95) 		sane-microtek2
Highscreen Scanboostar Premium SCSI stable OK, SCSI-ID=LinoHell Office2 umax
(v1.0-37) 		sane-umax

Manufacturer: Vuego

Comment: Company was renamed to Benq.

Still Cameras

Manufacturers: Kodak, Polaroid

Manufacturer: Kodak

Link(s): http://www.kodak.com/global/en/service/digCam/dc25/dc25.shtml, http://www.kodak.com/global/en/service/digCam/dc210/dc210.shtml, http://www.kodak.com/global/en/service/products/ekn006568.jhtml

Model Interface Status Comment Backend Manpage
DC20 Serial port beta DC-20 untested by author but reported to work dc25
(v1.2) 		sane-dc25
DC25 Serial port beta   dc25
(v1.2) 		sane-dc25
DC210 Serial port alpha   dc210
(v0.0) 		sane-dc210
DC240 Serial port alpha   dc240
(v0.0) 		sane-dc240

Manufacturer: Polaroid

Link(s): http://www.polaroid.com/

Model Interface Status Comment Backend Manpage
DMC SCSI stable   dmc
(v1.0) 		sane-dmc

Video Cameras

Manufacturers: Connectix

Manufacturer: Connectix

Link(s): http://www.connectix.com/

Model Interface Status Comment Backend Manpage
Color QuickCam Parport alpha Require root privileges. qcam sane-qcam
Greyscale QuickCam Parport alpha Require root privileges. Partly working. qcam sane-qcam

APIs

Backends: gphoto2, pint, pnm, test, v4l

Backend: gphoto2 (v0.0)

Link(s): mailto:peter@fales-lorenz.net
Manual page: sane-gphoto2
Status: beta
Description: Multiple cameras supported by the gphoto2 libraries
Comment: The long-term plan is to support all the cameras supported by the gphoto2 libraries (currently over 140 models). However, at this stage, only a han dful of cameras are definitely known to work with SANE. Other cameras will probably work if the native file format is EXIF or JPEG. Testers welcome!

Backend: pint

Manual page: sane-pint
Status: alpha
Description: Scanners with the machine-independent PINT interface

Backend: pnm (v1.0.8)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-pnm
Status: beta
Description: Reads PNM files
Comment: Used for debugging frontends

Backend: test (v1.0-21)

Link(s): http://www.meier-geinitz.de/sane/test-backend/
Manual page: sane-test
Status: stable
Description: Frontend-tester
Comment: Backend for testing frontends. Also serves as example for SANE backend options.

Backend: v4l (v1.0-2)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-v4l
Status: alpha
Description: Interface to Video For Linux API
Comment: Supports video cameras and other devices accessed by the v4l kernel API, e.g. bttv devices.

Meta Backends

Backends: dll, net

Backend: dll (v1.0.8)

Link(s): mailto:henning@meier-geinitz.de
Manual page: sane-dll
Status: stable
Description: Dynamic loading of shared-library backends.

Backend: net (v1.0.10)

Link(s): http://www.penguin-breeder.org/?page=sane-net
Manual page: sane-net
Status: stable
Description: Network access to saned servers
Comment: Can be used to access any scanner supported by SANE over the net.

Legend:

Model:
Name of the the device.
Interface:
How the device is connected to the computer.
Status:
A vague indication of robustness and reliability.
  • unsupported means the device is not supported at least by this backend. It may be supported by other backends, however.
  • untested means the device may be supported but couldn't be tested. Be very careful.
  • alpha means it must do something, but is not very well tested, probably has bugs, and may even crash your system, etc., etc.
  • beta means it works pretty well, and looks stable and functional, but not bullet-proof.
  • stable means someone is pulling your leg.
Comment:
More information about the level of support and possible problems.
Backend:
Name of the backend, with a link to more extensive and detailed information, if it exists, or the email address of the author or maintainer. In parentheses if available: Version of backend/driver; newer versions may be available from their home sites.
NEW! means brand-new to the current release of SANE.
Manual Page:
A link to the man-page on-line, if it exists.
Description:
The scope of application of the backend.
[Back]
sane-devel@mostang.com / SANE Development mailing list
This page was last updated on Wed Jun 4 17:31:43 2003